TeraStation 5010, 3010, and 3020 Series Firmware Updater for Mac Version 4.80 Name TeraStation 5010, 3010, and 3020 Series Firmware Updater Version 4.80 File ts5010_3010_3020_series-4.80_fwmac.dmg.zip Size 519,864,699 bytes Date January 27, 2021 Platform Intel Mac OS macOS 10.9 or later Models TS5210DN, TS5210DF, TS5410DN, TS5410RN, TS5810DN, TS51210RH, TS3210DN, TS3410DN, TS3410RN, TS3220DN, TS3420DN, TS3420RN Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manuals Quick setup guide, user manual This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL and applicable modules, and how to deliver them. You may be charged for the delivery cost. [Software Description] This software will update the TS5010, TS3010, and TS3020 series TeraStations’ firmware to version 4.80. If your unit’s firmware is already version 4.80 or later, you don’t need this update. [How to Verify the Firmware Version] Select your TeraStation from NAS Navigator2. The firmware version is displayed on the bottom right corner of the window. [Updating Firmware] • Do not turn off the TeraStation until the firmware update is completed and the “Finished” message appears. • Disconnect iSCSI volumes using the iSCSI initiator before updating the firmware. • If you are using firmware version 4.00 and log files were created between updating the firmware to version 4.00 and now, these log files may be deleted when updating the firmware. Make sure you have backed up the necessary log files to a different folder that is not on the TeraStation before updating the firmware. • If your TeraStation meets the following conditions, the TeraStation may not boot after restarting or updating the firmware: (1) The I70 and I71 information messages appear frequently, (2) The firmware is version 4.00. Although data on the TeraStation will be kept if the issue has already occurred on your TeraStation, there is no way to recover from the issue by yourself. Contact Buffalo technical support for assistance. If the issue hasn’t occurred yet, you may prevent the issue by changing the TeraStation’s log settings. Refer to the procedures below to change file access log settings. Step 1: Delete all existing file access logs. If the log files are necessary, copy them to another location. 1. From Settings, navigate to “Management” > “Logs”. 2. Click ‘Delete’ to the right of “File Access Logs”. 3. Click ‘Yes’. Note: If you want to copy log files to another location, follow the procedure below: 1. From Settings, navigate to “Management” > “Logs”. 2. Click ‘Edit’. 3. Enable “Create Shortcut to Logs” and select the shared folder where the link will be created. 4. Access the shared folder that you have configured at step 3 and copy the “file.log” file to the desired location. Step 2: Change the settings to save fewer file access logs. 1. From Settings, navigate to “Management” > “Logs”. 2. Click ‘Edit’. 3. Change archive rule settings to the following Buffalo-recommended values: Units: “Size” File Sizes: “100 MB” Versions: “13” [Notes] • Make sure the TeraStation’s MTU size is set to a value smaller than that of the hub or router. Larger MTU sizes may not allow data to be transferred to the TeraStation properly. • This firmware will send your usage information to Buffalo automatically. Usage information may include your TeraStation series name and firmware version, some settings (such as the number of shared folders), some drive information (such as S.M.A.R.T.), and usage environment (such as the number of client PCs). None of the collected information will contain your personal data such as usernames and passwords. Buffalo will only use the collected information to improve future firmware updates and no other purposes. To disable this function, open Settings after updating the firmware to this version, then navigate to “Management” > “Update” > “Edit” and disable “Update Notification”. For more detailed information, refer to the user manual of your TeraStation model. • Since firmware version 4.36, saved settings cannot be applied from a USB drive that contains saved settings from a unit that was running firmware version 4.32 or earlier. In such a case, create the settings restoration USB drive again using a unit running firmware version 4.36 or later. • Do not update the firmware from version 3.11 or earlier to 3.12 or later if the TeraStation is a TS51210RH series model and two UPS devices are connected to it. If the unit has been updated already, reconfigure the UPS settings. • If you are using firmware version 3.04 or earlier and the backup source or destination folder name contains “%”, that backup job should be reconfigured after updating the firmware to version 3.12 or later. • If you are using firmware version 4.00 and configure the SMB protocol version to 2.2.2 or higher, the TeraStation may not be accessible from the client devices. In such a case, change the SMB version to 2.1 or lower. • If settings are initialized with an iSCSI volume that had been created using an LVM-enabled drive or array, that iSCSI volume mode may be displayed as “NAS”, instead of “iSCSI” on the NAS volume list. Even if in such a case, the iSCSI volume remains accessible via the iSCSI initiator. [For Customers Using Replication] To securely copy your data via replication, a backup device access key must be configured for the replication target. Please make sure you have installed the latest firmware downloaded from the Buffalo website onto your TeraStation and verify that a backup device access key has been configured on the replication target folder for any configured replication jobs. Refer to the “Replication” section in the user manual of your TeraStation model for the procedure to configure a backup device access key to the replication target folder. If you are replicating devices over different subnets or through NAT abstraction, using a VPN is recommended for network security. [About Firmware Version] If you update the firmware from your TeraStation’s Settings, you may see a different firmware version than the one uploaded on the Buffalo website. The firmware version uploaded on the Buffalo website is the latest version. [Issues Occurring After the Firmware Update] • If the I61 message appears on the LCD panel and/or NAS Navigator2, open Settings, select the option to “Recover firmware” under “Action”, and click ‘OK’. • If the “The parameters for the specified method are invalid.” error message appears while changing settings on Settings, clear the browser cache and try again. [How to Update the Firmware] 1. Extract the downloaded installer file. 2. Execute “update”, then refer to the on-screen instructions. [Release Notes] Version 4.80 [2021-01-27] Added and Modified Features [Migration] • Now supports migrating settings and/or data to another Buffalo NAS device. [IP Address] • Now includes “100 seconds” as an option for the “Services Restarted After” setting. Bug Fixes [Remote Management Service] • Fixed a bug where the device could not be re-registered after it was unregistered once from Remote Management Service. [Amazon S3] • Fixed a bug where management backup could have been selected as a backup optioin when creating a backup job and a remote folder is configured as the backup destination. [Settings] • Fixed minor bugs. Version 4.70 [2020-11-16] Bug Fixes [Remote Management Service] • Fixed a bug where an unexpected disconnection occurred if internal information could not be acquired properly. • Fixed a bug where an unexpected disconnection occurred if a drive became overloaded. [Settings] • Fixed minor bugs. Version 4.68 [2020-08-18] Bug Fixes [Microsoft OneDrive Sync] • Fixed a bug where the sync process fails if the path of a sync target item is the specified character length. After this update, the sync time will become longer for the target items whose paths are 151 characters length or longer. Version 4.66 [2020-07-28] Added and Modified Features [S.M.A.R.T.] • Modified so that the functionality works properly after the SSD hard drives in the TS5210DF TeraStation model had their firmware updated. [Data Protection Mode] • Modified so that the functionality works properly after the SSD hard drives in the TS5210DF TeraStation model had their firmware updated. Version 4.64 [2020-07-21] Added and Modified Features [Remote Management Service] • Remote Management Service is now accessible via a proxy server. Remote Management Service will use the proxy server settings that are configured on the TeraStation after navigating to ‘Network’ > ‘Proxy Server’ on Settings. Bug Fixes [Settings] • Fixed minor bugs. Version 4.62 [2020-07-06] Added and Modified Features [Microsoft OneDrive Sync] • Modified so that the “pathIsTooLog” error is now recorded in the OneDrive error log when a file path length exceeds the character limit. Bug Fixes [Microsoft OneDrive Sync] • Fixed a bug where a sync process doesn’t proceed if too many files are stored in OneDrive. • Fixed a bug where the TeraStation becomes unstable if too many files are synchronized at once. • Fixed a bug where the download process fails if attempting to download 100,000 or more at once. • Fixed a bug where the sync process doesn’t proceed if OneDrive information is not acquired properly. • Fixed a bug where synchronization fails if there are no parent folders. • Fixed a bug where the modified date and time is updated when the file is uploaded while encryption is enabled. Version 4.60 [2020-03-23] Added and Modified Features [Remote Management Service] • Modified so that remote operations from Remote Management Service can be prohibited. Please refer to the Remote Management Service user manual for more detailed information. Bug Fixes [Remote Management Service] • Fixed a bug where a mount error occurred when the remote operations timer was configured. [Microsoft Azure Storage Sync] • Fixed a bug where the “Keep in container” option could not be selected for “Files Deleted in Backup Source”. Version 4.56 [2020-02-17] Bug Fixes [System] • Modified to patch vulnerabilities (CVE-2015-8325, CVE-2016-1908, CVE-2016-3115, CVE-2016-6210, CVE-2016-6515, CVE-2016-10009, CVE-2016-10011, CVE-2016-10012, CVE-2016-10708, CVE-2017-15906, CVE-2018-15473, CVE-2018-20685, CVE-2019-6109, and CVE-2019-6111). [Storage] • Fixed a bug where the connection status for the internal drives could not be detected properly. • Fixed a bug where drives that make up a RAID array could not be checked properly during bootup. • Fixed a bug where a RAID array became corrupted when using USB drives for restoration and initialization if a RAID 10 array was created on the TeraStation. • Fixed a bug where nothing occurred after clicking ‘Redetect Drive’ on the USB drive list page. [File Sharing] • Fixed a bug where the TeraStation freezes when accessing a shared folder. [Microsoft Azure Storage Sync] • Fixed a bug where the “Files Deleted in Backup Source” option was unexpectedly changed to “Delete from container” while changing a job setting. • Fixed a bug where unnecessary logs were recorded. [Microsoft OneDrive Sync] • Fixed a bug where files on OneDrive were not automatically deleted when the same files that were saved in a second level or deeper remote folder were deleted. • Fixed a bug where multibyte characters in an error log were not displayed properly. [Dropbox Sync] • Fixed a bug where certain authentication codes could not be registered to the TeraStation. [Amazon S3] • Fixed a bug where the status showed “Disconnected” even if the TeraStation was connected to Amazon S3. [Power Management] • Fixed a bug where a fan error was detected when a UPS device was connected. [Settings] • Improved security of Settings page. • Fixed a bug where a power user could not change the logged-in user’s password. • Fixed a bug where the user was booted from Settings on Safari if the display language was changed. [Remote Management Service] • Fixed a bug where some settings screens proceeded to the next step after an invalid value was entered. [Logs] • Fixed a bug where the log file size became too large after the TeraStation restarts if a shared folder was configured as the target folder to save file access logs. Version 4.54 [2019-12-03] Bug Fixes [SNMP] • Fixed a bug where the device’s firmware version and serial number could not be acquired. [Remote Management Service] • Fixed a bug where Remote Management Service could not display the device’s firmware version and serial number. Version 4.52 [2019-11-12] Added and Modified Features [Storage] • Added the “Redetect Drive” button to the USB drive list page. We recommend using the button when a connected RDX storage device shows the status as unformatted. [Settings] • Modified the design on drive setup. • Added the “Clear” button to remove information events from Dashboard. • Now supports TLS 1.2 to improve the security level for SSL. The previous versions of TLS (1.0 and 1.1) have been disabled by this update. [Email Notification] • Improved notification email content for drives that cannot acquire S.M.A.R.T. [File Sharing] • Improved the stability when accessing via SMB. • Modified so that SMB settings can be configured to have the Windows credential dialog appear when accessing a shared folder via SMB fails. Bug Fixes [System] • Modified to patch a vulnerability (CVE-2018-1160). [Storage] • Fixed a bug where a replacement drive inserted when a RAID array was in degraded mode is detected as a hot spare instead. [File Sharing] • Fixed a bug where the backup target became inaccessible if data was backed up with access restrictions configured for subfolders but the backup target doesn’t support access restrictions for subfolders. [Microsoft Azure Storage Sync] • Fixed a bug where some settings were not saved properly. [Microsoft OneDrive Sync] • Fixed a bug where time stamps for files on the TeraStation were changed to the upload or download date. [Amazon S3] • Fixed a bug where unexpected downloading occurred when enabling Amazon S3. [Settings] • Fixed a bug where an error message appeared due to a browser cache issue. [Logs] • Fixed a bug where logs regarding Remote Management Service were exported even though the function was disabled. • Fixed a bug where the I70 and I71 messages appeared even if file access logs did not exceed size limits. Version 4.48 [2019-10-17] Added and Modified Features [Remote Management Service] • Now supports the new device monitoring service, “Remote Management Service”. (This service is only available in the North America region.) Bug Fixes [System] • Modified to patch vulnerabilities (CVE-2018-13318, CVE-2018-13319, CVE-2018-13320, CVE-2018-13321, CVE-2018-13322, CVE-2018-13323, and CVE-2018-13324). Version 4.42 [2019-08-28] Added and Modified Features [Drives] • Modified so that when a drive with S.M.A.R.T. disabled is inserted, S.M.A.R.T. will be automatically enabled. [Settings] • Improved messages on Dashboard. [System] • Improved the system stability. Bug Fixes [System] • Fixed a bug where the TeraStation may not finish booting after updating the firmware to version 4.00. Version 4.40 [2019-06-24] Added and Modified Features [Logs] • Modified to save file access logs into a specified shared folder on the TeraStation. [Drives] • Modified so that a notification appears if free space decreases past the threshold percentage. Bug Fixes [System] • Fixed a bug where the initial setup wizard didn’t finish if no drives were inserted into the TeraStation. [Replication] • Fixed a bug where a replication job did not run after a replication error occurs. [Microsoft OneDrive Sync] • Fixed a bug where synchronization fails if files and folders in the shared folder that was configured for OneDrive Sync were moved. • Fixed a bug where synchronization fails if files in the shared folder that was configured for OneDrive Sync were changed. • Fixed a bug where if the Dashboard is displayed, a OneDrive Sync operation was recorded into the system log even if the function was disabled. Version 4.36 [2019-05-15] Bug Fixes [System] • Fixed a bug where if the TeraStation boots up in drive setup mode, the boot process doesn’t finish properly. Version 4.32 [2019-04-17] Added and Modified Features [System] • Added a few options for recovering the firmware in drive setup mode. • Modified to patch a vulnerability (CVE-2016-2183). • Modified to delete file access logs to reduce file size when the TeraStation labels the file size too large and cannot properly boot. [Amazon S3] • Improved the stability when uploading multiple files. • Improved the retry process if uploading fails. [Antivirus] • Modified to help properly activate the antivirus if authentication fails for the activation code but the code is correct. Bug Fixes [System] • Fixed a bug where joining to the AD domain fails after restarting from an unexpected shutdown. [Settings] • Fixed minor bugs. Version 4.20 [2019-02-21] Added and Modified Features [Microsoft OneDrive Sync] • Added “Microsoft OneDrive Sync” to synchronize with files in OneDrive or OneDrive for Business. You can upload/download files either on the TeraStation or OneDrive and have them sync between each other. [Power Management] • BW series and BL series UPS devices by Omron are now supported. (Note that the TS51210RH series cannot configure UPS sync using the front USB 2.0 port.) Bug Fixes [Failover] • Fixed a bug where data was not transferred via the LAN port that had been configured as “Backup LAN Port”. • Fixed a bug where a notification email may have been unintentionally sent when disabling failover. [Active Directory] • Fixed a bug where local users and groups could not be created after joining to the AD domain if there are already domain users and groups with the same name. [Storage] • Fixed a bug where a RAID array could not be deleted if all the drives that make up the RAID array were dismounted. • Fixed a bug where a drive error was not detected properly. [Name/Time/Language] • Fixed a bug where an error occurred when creating a shared folder or backup job if the hostname contains non UTF-8 multibyte characters. [Antivirus] • Fixed a bug where the restart process was requested before opening the Trend Micro NAS Security settings page. [Users] • Fixed a bug where admin user settings could not be changed after initialization. [SMB] • Fixed a bug where the TeraStation was not accessible via SMB when a lower limit version of the SMB protocol was configured to version 2.2.2 or later. • Fixed a bug where a shared folder on the TeraStation was not accessible from the bare-metal recovery USB memory device that was created by Arcserve UDP Ver6.5. [iSCSI] • Fixed a bug where the “File I/O Write Sync” value was not displayed properly on the advanced settings page. • Fixed a bug where the settings for the iSCSI volume that was created on the RAID array could not be changed if the RAID array has no free space when LVM is disabled. • Fixed a bug where the iSCSI volume was changed to the NAS volume after initialization if that iSCSI volume was created as a file I/O volume on the LVM-enabled area. [SNMP] • Fixed a bug where the used capacity of the RAID array was not displayed properly. [Network] • Fixed a bug where the iSCSI target IP address was detected even though the service port was restricted. [Power Management] • Fixed a bug where the E10 error appeared when changing the time settings while UPS sync was configured. [Others] • Fixed minor bugs. Version 4.16 [2018-10-29] Added and Modified Features [IP Address] • Added “FQDN Mapping” feature to map between an FQDN and an IP address. If the FQDN has multiple IP addresses on your network environment, this feature will be helpful. [Antivirus] • Added a “Data Collection Notice” link on the login page of the Trend Micro NAS Security settings page. Bug Fixes [Folder Setup] • Fixed a bug where an NTFS-formatted USB drive became inaccessible. [Replication] • Fixed a bug where the write access speed became slow for the shared folder being used for replication. [Settings] • Fixed minor bugs. Version 4.12 [2018-07-25] Added and Modified Features [Microsoft Azure Storage Sync] • Modified so that the TeraStation is able to synchronize with Microsoft Azure Storage. You can now back up files on the TeraStation and restore from Azure Storage. [RAID] • Modified so that a message to recommend backup appears when rebuilding the RAID array. [Cloud Storage] • Modified so that a shared folder name being used for cloud storage cannot be changed. [Logs] • Modified so that more file access log files can be saved. Bug Fixes [System] • Fixed a bug where more memory were allocated so that the stability was improved. [SMB] • Fixed a bug where macOS temp files settings could not be changed to “Delete when original file is deleted”. [Settings] • Fixed minor bugs. Version 4.00 [2018-02-26] Added and Modified Features [Settings] • Modified the design of the Settings interface. “Dashboard” is now available under your device status options. [Logs] • Modified so that file access logs can now be saved to the desired duration. The file access logs will contain the file access via SMB, FTP and WebAccess connections and login/logout history to Settings. [SMB] • Modified to be able to configure the lower limit for the SMB protocol version. [SNMP] • MIB objects have been added to show the date when the error or information events occurred based on the configured time zone of the MIB browser. • MIB objects have been added to use the same unit that the TeraStation’s Settings uses for total and used capacities of drives and LVM volumes on the MIB browser. [RAID] • Modified so that the confirmation screen will appear if a drive that is used for the RAID array could not be mounted during bootup. Note: If a RAID 10 array is configured, all affected drives may not be displayed on the confirmation screen. In such a case, check all affected drives for which the E16 error appears on the LCD panel or NAS Navigator2, then shut down the TeraStation. Check that all drives are inserted properly, then power on the TeraStation in drive setup mode. [Settings] • Improved the operability for selecting users on the user list. [Logs] • Modified the export format for the file access logs. • Modified to be able to delete the file access logs. Bug Fixes [System] • Fixed a bug where some words could not be used for usernames and group names. Refer to the user manual for the available words for usernames and group names. • Fixed a bug where NAS Navigator2 could not use the time settings on the computer for the TeraStation. • Fixed a bug where the power LED kept blinking and the bootup process did not complete. [Dropbox Sync] • Fixed a bug where the folder list could not be updated if Dropbox contains 41 folders or more. [Email Notification] • Fixed a bug where the layout on the daily report email became corrupted. [WebAccess] • Fixed a bug where some files’ attributes could not be displayed properly from WebAccess. [Cloud Storage] • Fixed a bug where upload speed may become slower if Amazon S3 was used for Cloud Storage. [Drives] • Fixed a bug where the drive status could not be displayed properly if a drive error occurred. [Backup] • Fixed a bug where the data was backed up completely even if the management backup was configured. [SMB] • Modified to patch Samba programming vulnerabilities (CVE-2017-14746 and CVE-2017-15275). Version 3.50 [2018-01-16] Added and Modified Features [SSD] • When bad blocks on the SSD drives exceed an unrecoverable amount on the TS5210DF TeraStation model, the unit now enters data protection mode and the data area becomes read-only. For more detailed information, refer to the user manual of your TeraStation. • Improved the condition to reach the guaranteed write capacity (TBW) for the drive on the TS5210DF TeraStation model. Bug Fixes [iSCSI] • Fixed a bug where if a drive that isn’t being used as part of a RAID array has an iSCSI volume created on it and the “Block I/O” option was selected for “Backstore”, the drive cannot be detected. [Replication] • Fixed a bug where the same shared folder could be configured as a replication target for multiple replication jobs. • Fixed a bug where the root shared folder could be configured as a replication target if a subfolder on its shared folder was configured as a replication source. [Logs] • Fixed a bug where a link to logs that were created in the shared folder could not be deleted even when the setting was disabled. [Settings] • Fixed minor bugs. Version 3.43 [2017-11-27] Added and Modified Features [Cloud Storage] • Modified so that a region can be selected when configuring settings with Amazon S3. If you can’t access a bucket and its region is blank, try configuring the region. [Settings] • Improved the stability of Settings interface. Bug Fixes [SMB] • Modified to patch Samba programming vulnerabilities (CVE-2017-12150, CVE-2017-12151, and CVE-2017-12163). [SFTP] • Fixed a bug where access-permitted groups could not access the shared folders. [Quota] • Fixed a bug where settings for a quota of 10,000 GB or larger could not be configured. [System] • Fixed a bug where a bootup process could not finish when shutting down and restarting the TeraStation. • Fixed a bug where a failed drive could not be dismounted properly. • Fixed a bug where settings could not be applied after the NAS volume size was expanded unless the TeraStation restarted. [Network] • Fixed a bug where some IP addresses and subnet masks could not be configured. [Folder Setup] • Fixed a bug where an NTFS-formatted USB drive was able to configure access restrictions despite it being prohibited. Version 3.40 [2017-10-02] Added and Modified Features [Settings] • Thai has been added as an option for display language. [iSCSI] • Improved the iSCSI service starting time after the network is restarted. Bug Fixes [WebAccess] • Fixed a bug where the WebAccess console could not be logged in to. Version 3.30 [2017-09-14] Added and Modified Features [WebAccess] • Access restrictions for subfolders and domain users are now supported. • Owners and access permissions are now displayed on the detail panel of the WebAccess browser console. [Update Notification] • Usage information will now be sent automatically after updating the firmware. To prevent this, disable update notification. [Backup] • The entered backup device access key can now be displayed. [Replication] • The entered backup device access key can now be displayed. [Settings] • Easy Admin is no longer available. Settings that were previously available on Easy Admin are now available from setup wizard. • Descriptions of system default users and groups are now available in every display language. • Modified the default file extension to .csv on the file selection window when importing users. Bug Fixes [System] • Fixed a bug where the TeraStation did not boot up when a system file was corrupted. The corrupted system file is now repaired automatically. • Fixed a bug where Settings could not be logged in to. [Replication] • Fixed a bug where a replication error occurs after failover was configured and then backup was subsequently configured. • Fixed a bug where a replication error occurs when the USB drive is disconnected and then reconnected after a replication job was created. • Fixed a bug where macOS temp files such as .DS_Store were transferred to the replication target folder. • Fixed a bug where unavailable rsync-compatible devices were displayed in the available server list. [Email Notification] • Fixed a bug where a notification email was not sent to certain email addresses. • Fixed a bug where importance levels for antivirus categories were not accurate. • Fixed a bug where information for only one drive in the RAID array was contained in the notification email. [Network] • Fixed a bug where the connection became randomly disconnected. [RAID] • Fixed a bug where if a drive that belongs to a RAID array was disconnected while the TeraStation is on, and then the RAID array is removed and the TeraStation is turned off, the status of all drives will appear as “Failed” when the drive is reconnected and the unit turned back on. • Fixed a bug where if a drive in the RAID array is disconnected while the TeraStation is off and then turned back on, the RAID array was not rebuilt using a spare drive. [Folder Setup] • Fixed a bug where a checkbox was not displayed for the created shared folders in the folder list so that the folders could not be selected. • Fixed a bug where a shared folder could not be created even if a name that contains an underscore is set as the folder name. [Power Management] • Fixed a bug where the “Wake Up TeraStation After Power Supply Recovers” option did not work on the TS3010 series TeraStations so that the unit did not boot up. • Fixed a bug where the UPS sync settings were not applied. [LCD Panel Settings] • Fixed a bug where the LCD panel remained lit even while the TeraStation was off after drive setup was finished. [Workgroup/Domain] • Fixed a bug where if a specific number of local users and groups are on the TeraStation, an error message will appear when the TeraStation joins an Active Directory domain. [Backup] • Fixed a bug where a setting could be selected when editing a backup job even if that setting could not be configured originally. • Fixed a bug where a backup error was not displayed when the backup job was canceled due to settings being changed while the backup job was running. • Fixed a bug where a backup job failed because neither the backup source nor the destination NAS devices could recover from standby mode even if both backup source and destination NAS devices have configured sleep mode settings. • Fixed a bug where the help link address of the backup error code was not correct. [SNMP] • Fixed a bug where iSCSI-related information was not displayed. [Failover] • Fixed a bug where a failover error message appears when canceling maintenance mode if the TeraStation contains too many files. • Fixed a bug where failover settings were not copied to the backup TeraStation properly. [Drive Setup] • Fixed a bug where recoverable firmware versions did not match with each model’s initial version. [SMB] • Fixed a bug where a shared folder could not be accessed by a “guest” user. • Fixed a bug where access permissions of the recycle bin folder or files in the recycle bin were not configured correctly if “Recycle Bin Permissions” was configured to “Administrator only”. [iSCSI] • Fixed a bug where a volume was not displayed if it is created with block I/O and WCE enabled. [Settings] • Fixed a bug where some messages were displayed in Japanese even if the display language was configured to English. • Fixed a bug where unnecessary help content were displayed when a power user logs in to Settings. • Fixed a bug where system-reserved addresses such as loopback addresses could be configured. • Fixed a bug where the displayed settings information did not match the settings actually configured on the UPS sync settings page. • Fixed a bug where some settings could not be changed if a shared folder was created by a power user. • Fixed other minor UI errors. Version 3.20 [2017-07-10] Added and Modified Features • Now compatible with the TS5810DN TeraStation model. [RAID] • Modified to be able to configure the RAID mode using the spare drive from the initial setup wizard. [Email Notification] • Modified to not show the items that are not used for determining the drive error in a drive status notification email. • Modified to show the status in a drive notification email that refers to the current S.M.A.R.T. values. [Drives] • Modified to show the status in Settings that refers to the current S.M.A.R.T. values. Bug Fixes [SMB] • Modified to patch a Samba programming vulnerability (CVE-2017-7494). • Fixed a bug where the TeraStation did not boot up when restarting if SMB is disabled. [Drives] • Fixed a bug where macOS temp files were not removed during a drive check even if the “Delete macOS temp files” checkbox is selected. • Fixed a bug where drive formatting failed if the drive contains the iSCSI volume created with “File I/O” for the “Backstore” option selected. • Fixed a bug where drive formatting failed while deleting a RAID array. [RAID] • Fixed a bug where the drive could not be rebuilt when rebuilding a RAID 1 array with RMM enabled. [Power Management] • Fixed a bug where the power error notification did not appear if a UPS power error occurred when UPS sync is configured. [Failover] • Fixed a bug where backup job information did not carry over properly to the replaced backup TeraStation during failover. [Email Notification] • Fixed a bug where a test email was not sent after properly configuring email notification settings. • Fixed a bug where a spare drive was labeled as “Dismount” in a drive status notification email. [Settings] • Fixed a bug where the contextual help was not displayed in the drive list window. • Fixed a bug where access restrictions for shared folders could not be configured by a power user via Easy Admin. [SNMP] • Fixed a bug where the following values could not be acquired on the TS5210DF TeraStation model: nasSSDSMARTBadBlockCountValue nasSSDSMARTBadBlockCountWorst nasSSDSMARTBadBlockCountThresh Version 3.12 [2017-05-18] Added and Modified Features [Backup] • rsync-compatible NAS devices can now be used for backup. The shared folders in rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. If the username or password on the rsync-compatible NAS device contains any non-alphanumeric characters, backup may not work properly. Using only alphanumeric characters for the username and password is recommended. [Access Restrictions for Subfolders] • Modified to exclude the trashbox folder when running the actions of the subfolders access restrictions to the shared folder that contains the trashbox folder. To run the actions, select the trashbox folder itself. [RAID] • Modified to be able to select unformatted drives when creating a RAID array or changing the RAID mode. [iSCSI] • Modified the TS5010 series TeraStations so they are compatible with VMware. Refer to the products’ website for the officially announced certificate information. [Dropbox Sync] • Modified to be compatible with the Dropbox API version 2. [IP Address] • Modified to add the option for delaying the restart of network services that occurs by triggering the LAN port’s link up/down. [Active Directory] • Modified to search for a domain controller using the IP address, DNS name, and computer name. • Modified to allow the maximum number of acquirable domain users and groups from 1,000 to 10,000. [Replication] • Added the field to enter a backup device access key. This access key is the same as the one used for backup jobs. [Failover] • Increased the security level. [Power Management] • The TS51210RH TeraStation model now supports connecting two UPS devices. [Drive Setup] • The I61 information message is now displayed when the TeraStation is in drive setup mode. [Settings] • Increased the security level. Bug Fixes [File Sharing] • Fixed a bug where file sizes were not displayed properly on Windows 10 via SMB connections. • Fixed a bug where an .exe file could not run in Explorer if the file was uploaded via WebAccess or AFP connections. [Access Restrictions for Subfolders] • Fixed a bug where actions did not run for the first level files if “Do not apply to folders and files in subfolders and beyond” is selected. [Drives] • Fixed a bug where the help for drive formatting was not displayed on Settings if the display language is set to Japanese or English. • Fixed a bug where the drive bay status showed “Dismounted/Plugged” even if no drive was plugged in. [RAID] • Fixed a bug where the drive bay status showed “Dismounted/Plugged” even if no drive was plugged in. • Fixed a bug where the status was not displayed properly when a RAID 5 or 6 array is configured with RMM. [Web Services] • Fixed a bug where 1 GB or larger sized files could not be uploaded to Amazon S3. • Fixed a bug where invalid folders were created if syncing files from the Dropbox folder. • Fixed a bug where 1.5 GB or larger sized files could not be downloaded from the Dropbox folder. • Fixed a bug where a blank error message appears when the error occurred during renaming the shared folder name that the folder is used for Dropbox Sync. • Fixed a bug where Dropbox Sync tasks disappeared if the tasks were configured using invalid proxy server settings. [Port Trunking] • Fixed a bug where a wired network connection became unavailable on the TS51210RH TeraStation model when disconnecting/reconnecting the Ethernet cable and port trunking is configured. [Backup] • Fixed a bug where the TeraStation could not be detected when configuring backup on another TeraStation if too many users and/or groups were added for access restrictions. [Replication] • Fixed a bug where the TeraStation could not be detected when configuring replication on another TeraStation if too many users and/or groups were added for access restrictions. • Fixed a bug where files may disappear if the second level folders in the same shared folder were configured as both source and destination folders for replication. • Fixed a bug where a replication error was still detected after unsynced files were resynced and the error had disappeared. [Failover] • Fixed a bug where the TeraStation could not be detected when configuring failover on another TeraStation if too many users and/or groups were added for access restrictions. [Power Management] • Fixed a bug where the power supply stopped before the shutdown process completed if the device was a PET501J1C UPS device by Fuji Electric. • Fixed a bug where the E10 error did not disappear even after disconnecting/reconnecting the serial cable of a serial connection UPS device. • Fixed a bug where the E10 error appeared if UPS settings were configured using a serial connection UPS device. • Fixed a bug where the TeraStation may shut down again when the unit boots up while the power outage is still ongoing. This is triggered if the UPS settings were configured so that the TeraStation remains shut down after a specified number of minutes passes when the power outage occurred. • Fixed a bug where the TeraStation did not shut down when the power failure occurred if the “Delay shut down until the number of iSCSI connections reaches zero” option is selected with the iSCSI switch is disabled. • Fixed a bug where the UPS settings were finished even if no UPS device was connected. • Fixed a bug where the E10 error appears randomly if the TeraStation’s time was configured using previous time settings. [Sleep Timer] • Fixed a bug where the power LED did not blink while the TeraStation is in sleep mode. [Drive Setup] • Fixed a bug where a drive error LED did not extinguish if the TeraStation boots up in drive setup mode while a drive error LED was glowing. [Settings] • Fixed a bug where Settings became inaccessible. • Fixed a bug where an invalid error message appears if a non-admin user was logged in to Settings and a specific operation was made. Version 3.03 [2017-04-11] Added and Modified Features [System] • Now compatible with the TS5210DF TeraStation model. [Storage] • SSD TRIM is now implemented for the TS5210DF TeraStation model. [SNMP] • SNMP protocol now supports S.M.A.R.T. for SSDs on the TeraStation. Update the MIB file on your SNMP client software to the latest version. You can download the MIB file from the Buffalo website. Bug Fixes [File Sharing] • Fixed a bug where files written via SMB protocols could not be accessed by anyone other than the file owners if access restrictions of the subfolders were disabled. Version 3.02 [2017-03-13] Added and Modified Features • Now compatible with the TS51210RH TeraStation model. Version 3.00 [2017-02-16] Added and Modified Features [Antivirus] • Now includes “Trend Micro NAS Security” virus scanning software. The antivirus software will protect files in the shared folders, including files on USB drives, from virus infection. To activate this function, a license (sold separately) should be registered. [Access Restrictions] • Access restrictions can now be applied to subfolders and subfiles. [Drive Setup] • The TeraStation now has recovery mode to recover the corrupted firmware when the unit doesn’t boot properly. The unit can enter recovery mode by turning it on while holding down the function button. [WebAccess] • Music files are now playable from browsers that don’t support flash player. [RAID] • Improved so that RAID rebuild and scan times have been reduced. [USB Drives] • The following external USB drive models are now supported: HD-DT/R6 series HD-HT/R6 series [Dropbox Sync] • Added the ability to verify an SSL certificate for the proxy server. [Port Trunking] • Added “ALB” to the port trunking policy. It will distribute incoming and outgoing network packets’ traffic loads. [Backup] • Subfolders’ access restriction settings can be inherited to the backup destinations. To inherit the settings, both source and destination devices should be the TS3010 series or TS5010 series TeraStations running firmware version 3.00 or later. [Failover] • Subfolders’ access restriction settings can be inherited to the backup unit. To inherit the settings, both source and destination devices should be the TS3010 series or TS5010 series TeraStations running firmware version 3.00 or later. • Modified so that failover could not be configured if not all drives were inserted. [Replication] • Subfolders’ access restriction settings can be inherited to the replication destinations. To inherit the settings, both source and destination devices should be either TS3010 series or TS5010 series TeraStations running firmware version 3.00 or later. [Settings] • Improved the response speed when logging in. [System] • Improved the content of system log. • Improved usability of display buttons on the TeraStation. Bug Fixes [NFS] • Fixed a bug where the shared folder selection window was not displayed properly when adding an NFS rule if multiple shared folders with NFS enabled were created. • Fixed a bug where a shared folder that contains multibyte characters in its name could not be accessed via NFS connections. Accessing shared folders whose names contain multibyte characters from Windows computers is not supported. [WebAccess] • Fixed a bug where a folder that contains a 4 GB or larger file could not be downloaded. [Drives] • Fixed a bug where the incorrect drive number was reported as the failed drive in a notification email. • Fixed a bug where the bootup process took time when disconnecting a drive while the TeraStation is off and it is powered on. • Fixed a bug where the I31 message did not disappear after configuring a drive as a spare drive using the function button. [RAID] • Fixed a bug where a spare drive was incorrectly labeled as failed on Settings even if the drive is not malfunctioning. • Fixed a bug where the I46 and I47 messages did not disappear after configuring the unit to RAID 5 using RMM. [USB Drives] • Fixed a bug where NAS Navigator2 shows an XFS-formatted USB drive as unformatted. [Network] • Fixed a bug where NTP settings became disabled automatically when the initial setup was made under the environment that the TeraStation could not access to an NTP server. [SNMP] • Fixed a bug where the firmware update version acquired by SNMP was incorrect. [Backup] • Fixed a bug where backup files remained after backup jobs were canceled. [Failover] • Fixed a bug where backup files remained after failover was canceled. • Fixed the failover trigger. • Fixed a bug where the “Configuring failover...” message was not displayed when logging in to the backup unit’s Settings after restarting. [Replication] • Fixed a bug where backup files remained after replication jobs were canceled. • Fixed a bug where the I33 message was not displayed even if the replication destination was not reachable. [Time Machine] • Fixed a bug where shared folders which were not configured for Time Machine were displayed on macOS. [Power Management] • Fixed a bug where UPS sync didn’t work after disconnecting and reconnecting a USB cable. Version 2.20 [2017-01-16] Added and Modified Features [Network] • A 10GbE port now supports 2.5GBASE-T and 5GBASE-T connections. Bug Fixes [Web Services] • Fixed a bug where multiple file uploads failed when files were saved into the sync source folder at the same time. [Replication] • Fixed a bug where the I33 message accidentally appeared during periodic sync. [Send Usage Feedback to Buffalo] • Fixed a bug where the “enable” option was displayed as “disable” (and vice versa) for languages other than English and Japanese. Version 2.10 [2016-11-16] Added and Modified Features [WebAccess] • WebAccess is a software utility for accessing files in the shared folder of your TeraStation from your computers or mobile devices through the Internet. [NFS] • NFS offers access to the shared folders of your TeraStation from NFS clients. [Proxy Server] • If you place the TeraStation on a network that passes through a proxy server, configure the proxy server to allow firmware updates from Settings. [Replication] • Encryption and compression functions are now available during data transfer. Encrypted data will be transferred securely on the network. Compressed data will ease the network load to prevent bottlenecks. [Send Usage Feedback to Buffalo] • This function sends your usage information to Buffalo automatically for product quality improvement. It is enabled by default. [Power Management] • When you select “Use last state”, the TeraStation will revert to the state before a power failure, power-on, or power-off occurred. • USB-compatible UPS devices by Fuji Electric are now supported. [Alert Sound] • You can now configure the beeping triggers. [Front Panel] • You can now configure the settings of LCD and brightness of LCD and LEDs. [Settings] • Added the “RAW Value” row into the S.M.A.R.T. information page. • Modified the label from “Ethernet Frame Size” to “MTU Size”. You can configure the desired MTU size. [File Sharing] • Improved stability. [I'm here] • Modified the LED blinking trigger when sending the “I'm here” packets from all LEDs to only the info LED. Bug Fixes [Settings] • Fixed a bug where the text in Settings were displayed in gray. • Fixed a bug where RMM could not be enabled while RAID 6 is configured. • Fixed a bug where the notification message was not displayed when opening Settings using unsupported browsers on Windows XP and Windows Server 2003. [Folder Setup] • Fixed a bug where a shared folder became public to anyone when configuring the domain group read and write access from the shared folder settings page and changing access restrictions to no access from the domain group settings page. [Quota] • Fixed a bug where data could not be written to the shared folder after the quota alert capacity had been continuously exceeded for a week. [FTP] • Fixed a bug where the shared folders could not be accessed via FTP if access restrictions configured by a specific number of groups were enacted and the TeraStation was restarted. [RAID] • Fixed a bug where a spare drive entered degraded mode when booting. • Fixed a bug where the total RAID array capacity did not expand when adding a drive to the RAID array using RMM. [LVM] • Fixed a bug where a block I/O volume created on drive 2 disappeared when enabling LVM for the RAID array that is made up of drives 3 and 4. [Network] • Fixed a bug where the default gateway and DNS settings were cleared. • Fixed a bug where unnecessary response packets were sent when searching for the device using UPnP. [Backup] • Fixed a bug where the “A system error occurred.” message appears and the backup job settings could not be changed. [Failover] • Fixed a bug where configuring failover failed. [Email Notification] • Fixed a bug where blank emails were sent. • Fixed a bug where some notification emails were detected as spam by a mail server. [Sleep Timer] • Fixed a bug where TeraStation shutdown via the sleep timer was canceled when disconnecting and re-connecting the USB cable. [Configuration Migration] • Fixed a bug where the “Drive/Array” information of the shared folder created by cloud storage on the shared folder settings page was migrated. • Fixed a bug where the admin group’s email address was not migrated. • Fixed a bug where configuration migration from a TS-XHL series device failed. [Boot Authentication] • Fixed a bug where iSCSI volumes became uneditable or undeletable if the iSCSI volumes had already been created before configuring boot authentication. You must back up data on the iSCSI volumes before configuring boot authentication. [Info] • Fixed a bug where the I18 message did not disappear. [Error] • Fixed a bug where the E22 error occurred when disconnecting a drive that was part of the built RAID array. Version 2.03 [2016-10-04] • Initial release.