TS3000 Series Firmware Updater for Windows Version 2.00 Name TS3000 Series Firmware Updater Version 2.00 File ts3000-v200.zip Size 436,435,083 bytes Date September 2, 2020 Platform Windows PC OS Windows 10 (64- and 32-bit), 8.1 (64- and 32-bit), 8 (64- and 32-bit), 7 (64- and 32-bit), Vista (64- and 32-bit), XP Windows Server 2012, 2008, 2003 Models TS3200D, TS3400D, TS3400R Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manuals Quick setup guide, user manual This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL and applicable modules, and how to deliver them. You may be charged for the delivery cost. [Software Description] This software will update the TS3000 series TeraStations’ firmware to version 2.00. If your unit’s firmware is already version 2.00 or later, you don’t need this update. [How to Verify the Firmware Version] Select your TeraStation from NAS Navigator2. The firmware version is displayed on the bottom right corner of the window. [Updating Firmware] • Please consult technical support or your local customer service representative if the firmware update causes unexpected issues. • Do not turn off the TeraStation until the firmware update is completed and the “Finished” message appears. • USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them. [Note] When you open Settings after updating to this firmware version, information on the page such as the hostname may not be displayed properly. In such a case, clear the web browser cache and then refresh the browser. [How to Update the Firmware] 1. Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different. For example, if the IP address and subnet mask of the computer are “192.168.0.10/255.255.255.0” and the IP address and subnet mask of the TeraStation are “192.168.1.150/255.255.255.0”, then the updater will not work properly. In such a case, reconfigure the TeraStation’s IP address and subnet mask to “192.168.0.150/255.255.255.0”. Then, the devices will be on the same subnet and the updater will work properly. 2. Exit all applications. Also, stop or exit any firewall software. 3. Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open. 4. If multiple TeraStations are connected to the network, select which TeraStation to update. 5. Click ‘Update’ and enter the TeraStation’s admin password. 6. Click ‘OK’. 7. It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don’t disconnect or power down the TeraStation until the update is finished. 8. When the update is finished, a message will be displayed. [Release Notes] Version 2.00 [2020-09-02] Added and Modified Features [Remote Management Service] • Now supports the new device monitoring service, “Remote Management Service”. (This service is only available in the North America region.) If the “Remote Management Service” button does not appear on Settings even after the firmware is updated, clear the web browser cache and refresh the browser. Bug Fixes [SNMP] • Fixed a bug where the device’s firmware version and serial number could not be acquired. [Name/Time/Language] • Fixed a bug where if the date is set to “2020/12/1” and a later date and the TeraStation is restarted, the configured date reverts to “2007/11/1”. [Settings] • Fixed a bug where a hostname is not displayed properly on Settings. [System] • Modified to patch vulnerabilities (CVE-2015-8325, CVE-2016-1908, CVE-2016-6210, CVE-2016-6515, CVE-2016-10009, CVE-2016-10010, CVE-2016-10011, CVE-2016-10012, and CVE-2018-1160). Version 1.92 [2019-11-20] Bug Fixes [System] • Modified to patch vulnerabilities (CVE-2018-13318, CVE-2018-13319, CVE-2018-13320, CVE-2018-13321, CVE-2018-13322, CVE-2018-13323, and CVE-2018-13324). Due to this change, you will be required to enter the username and password for certain actions, even when opening Easy Admin. Version 1.91 [2019-01-16] Bug Fixes [System] • Fixed a bug where a temperature error was erroneously triggered if the S.M.A.R.T. information could not be acquired. Version 1.90 [2018-06-19] Added and Modified Features [Amazon S3] • Modified so that a region can be selected when configuring settings with Amazon S3. If you can’t access a bucket and its region is blank, try configuring the region. • Fixed a bug where unexpected downloading occurred when enabling Amazon S3. Bug Fixes [Backup] • Fixed a bug where a backup error was not displayed when the backup job was canceled due to settings being changed while the backup job was running. [Amazon S3] • Fixed a bug where a backup error occurred when backup was enabled. • Fixed a bug where the upload speed may become slow when cloud storage is configured. Version 1.85 [2018-04-25] Added and Modified Features [SNMP] • MIB objects have been added to show the date when the error or information events occurred based on the configured time zone of the MIB browser. • MIB objects have been added to use the same unit that the TeraStation’s Settings uses for total and used capacities of drives and LVM volumes on the MIB browser. Bug Fixes [SMB] • Modified to patch Samba programming vulnerabilities (CVE-2017-12150 and CVE-2017-12163). Version 1.84 [2018-01-18] Bug Fixes [SMB] • Modified to patch a Samba programming vulnerability (CVE-2017-15275). Version 1.83 [2017-11-16] Bug Fixes [Replication] • Fixed a bug where a replication error occurs when the USB drive is disconnected and then reconnected after a replication job was created. [NFS] • Fixed a bug where the TeraStation could not be accessed from specific NFS clients. [Email Notification] • Fixed a bug where a test email was not sent after properly configuring email notification settings. [System] • Fixed a bug where the SMB log did not rotate. • Fixed a bug where a NAS API error occurs and creating a backup job fails after applying settings from a USB drive. [Backup] • Fixed a bug where the TeraStation could not be detected when configuring backup on another TeraStation if too many users and/or groups were added for access restrictions. • The backup target folder for a backup job where a different TeraStation is the backup source has been changed to “backup target”/“date”/“backup source”. [Settings] • Fixed a bug where access restrictions for shared folders could not be configured by a power user via Easy Admin. • Increased the security level. [Failover] • Fixed a bug where configuring failover failed. • Fixed a bug where a failover error message appears when canceling maintenance mode if the TeraStation has too many files. [SMB] • Fixed a bug where an access-restricted folder that only admin users can access could not be accessed after initializing settings. Version 1.82 [2017-06-19] Bug Fixes [SMB] • Modified to patch a Samba programming vulnerability (CVE-2017-7494). Version 1.81 [2017-06-05] Bug Fixes [UPS Sync] • Fixed a bug where the TeraStation may have stopped working if a UPS device was connected. Version 1.80 [2017-05-08] Bug Fixes [Replication] • Added the field to enter a backup device access key. This access key is the same as the one used for backup jobs. [Failover] • Increased the security level. Version 1.71 [2017-03-28] Bug Fixes [System] • Fixed a bug where the TeraStation was disconnected from the network if a shared folder on this TeraStation was configured as a destination for saving recording data for the surveillance camera. [Failover] • Fixed a bug where newly-created folders or files saved on the main TeraStation could not be copied to the backup TeraStation and the backup unit did not replace the main unit properly. [UPS Sync] • Fixed a bug where the E10 error kept displaying if a specific UPS device was connected by a serial cable. [Antivirus] • Fixed a bug where antivirus became disabled when waking up from sleep mode. [Settings] • Fixed a bug where the username was displayed on the “Email Address” box when verifying the user account information. • Fixed a bug where the “Confirm Operation” window appeared corrupted on certain browsers. Version 1.70 [2016-08-16] Bug Fixes [System] • Fixed a bug where a working drive was erroneously identified as malfunctioning. • Fixed a bug where the “Size on disk” of files on the TeraStation was displayed as larger than the actual size on Windows 8.1 or later. • Modified to patch an ImageMagick filtering vulnerability (CVE-2016-3714). • Modified to patch Bash programming vulnerabilities (CVE-2014-7186 and CVE-2014-7187). • Modified to patch OpenSSL programming vulnerabilities (CVE-2016-2176, CVE-2016-2109, CVE-2016-2108, CVE-2016-2107, CVE-2016-2106, and CVE-2016-2105). • Modified to patch lighttpd programming vulnerabilities (CVE-2013-4559 and CVE-2014-2323). [Settings] • Fixed a bug where Settings could not be accessed. [Configuration Migration] • Fixed a bug where configuration migration from a TS-XHL series device failed. [Email Notification] • Fixed a bug where blank emails were sent. • Fixed a bug where some notification emails were detected as spam by a mail server. To address this issue, the “Sender Address” field has been added to the email notification settings page in Settings. [Sleep Timer] • Fixed a bug where the shutdown configured via the timer schedule did not work properly. [UPS Sync] • Modified to have the E10 error appear if the connection between the TeraStation and the UPS could not be established. [Quota] • Fixed a bug where up to 2047 GB were allocated as the quota size. [SMB] • Fixed a bug where the trashbox name is sometimes displayed as “.recycle” instead of “trashbox”. The “.recycle” folder can now be deleted by clicking ‘Empty Recycle Bin’ from Settings after updating the firmware to this version. • Modified to patch Samba programming vulnerabilities, including a Badlock vulnerability (CVE-2016-2112, CVE-2016-2115, CVE-2016-2118, CVE-2016-2110, CVE-2016-2111, CVE-2015-5370, CVE-2016-2113, CVE-2016-2114, CVE-2015-5252, CVE-2015-5296, CVE-2015-5299, and CVE-2015-7560). [NFS] • Fixed a bug where the shared folder selection window was not displayed properly when adding an NFS rule if multiple shared folders with NFS enabled were created. [FTP] • Fixed a bug where the TeraStation could not be accessed via FTP after configuring access restrictions with a group that includes a specific number of members, then restarted. [Workgroup/Domain] • Fixed a bug where domain users could not access shared folders if the group that these domain users joined is configured for access restrictions. [Network] • Fixed a bug where default gateway and DNS settings were cleared when disconnecting and reconnecting the Ethernet cable. • Fixed a bug where Wake-on-LAN did not work when disconnecting and reconnecting the power cable after the shutdown. [Services] • Fixed a bug where a music file saved in a folder that contains a space in its folder name was not detected if the folder was used as a public folder for iTunes. Version 1.60 [2016-04-14] Added and Modified Features [iSCSI] • Modified to display clients connecting to the volumes when displaying the connection history. You can see it by navigating to ‘Drives’ > ‘iSCSI’ and clicking ‘Show Active Connections’ on Settings. Bug Fixes [Amazon S3] • Fixed a bug where while on the AWS Management Console, renamed or uploaded files did not appear on the TeraStations. • Fixed a bug where Amazon S3 did not work if drive 1 fails while Amazon S3 was enabled. [Others] • Fixed a bug where an error message appears when accessing the shared folder settings for a shared folder that has access restrictions enabled for local users. Version 1.50 [2016-02-24] Added and Modified Features [SNMP] • Modified to support SNMPv3. • Modified so that more of the following settings can be acquired via the SNMP protocol: ◦ Model name ◦ Firmware version ◦ Serial number ◦ Checking whether newer firmware has been released ◦ Showing whether the function status is enabled or disabled ◦ S.M.A.R.T. for each drive Update the MIB file on your SNMP client software to the latest version. You can download the MIB file from the Buffalo website. [OpenSSL] • Updated OpenSSL to the latest version. [Email Notification] • Modified so that the report categories and when the email will be sent are now configurable. The current settings will be taken over by the firmware update but we recommend verifying if the function works properly after the firmware update. • S.M.A.R.T. information is now available to be sent via the notification email. It can be configured from “Advanced Report Settings”. Bug Fixes [Failover] • Fixed a bug where failover could not be canceled temporarily if an online update notice is present. [Email Notification] • Fixed a bug where authentication settings were kept even if authentication was disabled. [UPS Sync] • Fixed a bug where the E10 error occurred when a specific setting was made without connecting the UPS to the TeraStation. [System] • Fixed a bug where Settings could not be accessed. • Fixed a bug where the status of a spare drive shows an error during bootup. • Fixed a bug where the CPU became overloaded when a test email was sent using incorrect settings. [USB Drives] • Fixed a bug where files that contain multibyte characters in the filename could not be accessed when they were stored in NTFS-formatted USB drives. [SMB] • Fixed a bug where an access-restricted folder that only admin users can access could not be accessed after initializing settings. Version 1.41 [2015-09-03] Bug Fixes [USB Drives] • Fixed a bug where some USB drives were not recognized by the TeraStation. Version 1.40 [2015-07-30] Bug Fixes [Configuration Migration] • Fixed a bug where an Omron UPS was not recognized properly when using a D-sub 9-pin connector. [Replication] • Improved stability. • Fixed a bug where the TeraStation became slower when accessing the replication source shared folder via FTP. • Fixed a bug where replication errors may occur when both virus scan and replication were enabled. [File Sharing] • Fixed a bug where any user or group could access an access-restricted shared folder if the folder’s access restriction settings were set to no access. Since this firmware update, it is modified so that only admin users and groups can access the folder. Version 1.30 [2015-06-04] Added and Modified Features • TS-X series TeraStations now support the settings transfer feature. • Configuration migration now supports config files (.nas_config) that are password-protected. Bug Fixes [Configuration Migration] • Fixed a bug where protocols other than SMB were enabled on the migration target TeraStation if the migration source enabled Hidden Share and transfered the setting. • Fixed a bug where access restrictions that were disabled before settings transfer became enabled. • Fixed a bug where no error messages were displayed when the number of registrable shared folders, users, and groups reaches the maximum. • Modified the error message when the migration target TeraStation joins a different domain network environment than the one saved in the config file. • Modified the error message when the network became disconnected while transferring settings. • Modified the error message when the config file could not be loaded. [Network] • Fixed a bug where access restrictions with domain users reverted to disabled after restarting the unit. Version 1.20 [2015-04-06] Added and Modified Features • Added feature to transfer settings from TS-HTGL/R5 series TeraStations (as of March 2015). Bug Fixes [File Sharing] • Modified to patch Samba programming vulnerabilities (CVE-2014-0178 and CVE-2015-0240). Version 1.16 [2015-01-14] Added and Modified Features [Settings] • OS X 10.10 is now supported. Bug Fixes [Network] • Modified to patch OpenSSL programming vulnerabilities (CVE-2014-3567 and CVE-2014-3568) that are also known as the POODLE (SSL3.0) vulnerability. Version 1.15 [2014-11-28] Bug Fixes [System] • Fixed a bug where a service that sent email notifications did not run. • Fixed a bug where NTP sync did not work. • Fixed a bug where the user was not informed of an available online update. • Fixed a bug where S.M.A.R.T information could not be obtained. • Fixed a bug where a scheduled RAID scan did not run. • Fixed a bug where sleep timer did not run. • Fixed a bug where a scheduled backup did not run. Version 1.14 [2014-10-03] Added and Modified Features [System] • Improved log messages in the SMB access logs. • CPU and memory utilization is now displayed. [Replication] • Improved stability. Bug Fixes [System] • Modified to patch Bash programming vulnerabilities (CVE-2014-6271 and CVE-2014-7169). • Improved so that services do not stop when connecting/disconnecting USB devices. • Fixed a bug where email notifications sent the same two emails after the firmware updates. • Fixed a bug where port-trunked devices could not be selected for surveillance server. • Fixed a bug where some settings were not copied during failover. [Replication] • Fixed a bug where the I33 message appears in Settings, NAS Navigator2, and on the LCD panel even though replication was not configured. Version 1.13 [2014-08-21] Added and Modified Features [Backup] • The Windows backup option has been removed from the shared folder creation and editing pages. Using Windows Server to back up to the TeraStation no longer requires additional configuration. [Network] • Modified so that the IP address, the subnet mask, the default gateway, and the DNS server address can be configured from the same settings page. [Email Notification] • Improved email notifications for English, Japanese, and German languages. [Others] • Modified the messages on the LCD panel. • Improved some texts on Settings. Bug Fixes [Backup] • Fixed a bug where the backup process did not work when backing up too many files. • Fixed a bug where a backup job could not be added if the backup target folder name contains a double-byte space. • Fixed a bug where a backup job failed if a shared folder in a LVM volume is configured as a backup source. • Fixed a bug where the TeraStation did not respond if too many backup jobs were configured or deleted at the same time. • Fixed a bug where Amazon S3 folder was not displayed as a backup target. [Replication] • Fixed a bug where a replication job could not be added if the replication target folder name contains a double-byte space. • Fixed a bug where a TeraStation on a different network could not be configured as a replication target. [Amazon S3] • Fixed a bug where file copying failed if too many files were copied at once. • Fixed a bug where downloading failed if the downloaded file is 2 GB or larger. • Fixed a bug where the connection status didn’t show “Error” when a connection error occurred. • Fixed a bug where invalid events were logged. [Network] • Fixed a bug where joining Active Directory may sometimes fail. • Modified so that the IP address, the subnet mask, the default gateway, and the DNS server address can be configured from the same settings page. • Fixed a bug where an invalid default gateway was assigned when changing the IP address on NAS Navigator2. [FTP] • Fixed a bug where files that are 10 GB or larger could not be transfered via FTP. • Fixed a bug where a local user could not access the TeraStation via FTP if the TeraStation joined a domain network. [FTPS] • Fixed a bug where a local user could not access the TeraStation via SFTP if the TeraStation joined a domain network. [USB Drives] • Fixed a bug where an exFAT-formatted USB drive disappeared if a drive check was run on it. • Fixed a bug where if a file is copied to an exFAT-formatted USB drive, an incorrect character may be displayed in the filename. [Update] • Fixed a bug where the guest account was automatically enabled after the firmware was updated from version 1.11. • Fixed a bug where some settings were not recovered from the USB memory device when restoring settings. [Email Notification] • Fixed a bug where the date in the sent email header was blank. • Fixed a bug where email notifications failed if the email password contains specific special characters. [Others] • Fixed a bug where Direct Copy from the digital camera in PTP mode would fail. • Fixed a bug where an access-limited folder could not be accessed even if a user was allowed to access the folder. • Fixed a bug where user deletion events were not logged in the system log. • Fixed a bug where NTP settings could not be changed if surveillance server was enabled. • Fixed a bug where users imported from a CSV file did not join the “hdusers” group. Version 1.12 [2014-02-07] Added and Modified Features [System] • Modified so that user partitions will now be undamaged and available after recovering the firmware. Version 1.11 [2013-11-01] Added and Modified Features [System] • Now includes “Trend Micro NAS Security” virus scanning software. Extended virus scanning update licenses are available separately (OP-TSVC-5Y, OP-TSVC-3Y, and OP-TSVC-1Y). • Modified the beep sound during bootup. [Replication] • Compression and encryption of data transfers are now supported. Using these functions may lower the transfer speed. [NFS] • Now supports read-only folders. • Async is now available when the device is in kernel mode. After updating the firmware, the default setting is “Async”. To change it to “Sync”, go to ‘File Sharing’ > ‘NFS’, select the ‘NFS Rules’ tab, and click ‘Add Rule’. [iSCSI] • IQN is now displayed in volume settings. Individual IQNs for each iSCSI volume are available in ‘Drives’ > ‘iSCSI’. Bug Fixes [System] • Fixed a bug where data was not saved properly when the power was cut off right after writing the data. • Fixed a bug where the user could access Settings while updating the firmware. [RAID] • Fixed a bug where RAID scanning didn’t work on the first day of each month. [Backup] • Fixed a bug where a backup job failed if too many files were backed up at once. [UPS Sync] • Fixed a bug where the E10 error incorrectly appears when an APC UPS entered test mode. Version 1.10 [2013-09-03] Added and Modified Features [System] • Now compatible with the TS3200D TeraStation models. Bug Fixes [System] • Fixed a bug where applying settings from a USB drive failed if an additional USB drive was connected to the TeraStation. • Fixed a bug where system files were corrupted and the TeraStation failed to boot when all drives were dismounted. • Fixed a bug where TeraStations failed to boot via Wake-on-LAN after unplugging the power cable without shutting the TeraStation down. • Fixed a bug where a drive error appears for a hot spare drive when the TeraStation was rebooted. • Fixed a bug where failover was not configured properly from the backup TeraStation’s Settings. • Fixed a bug where “admin” settings couldn’t be changed after settings were initialized. [Backup] • Fixed a bug where a TeraStation could be configured as the management backup target for a TeraStation on another network segment. Version 1.01 [2013-08-07] [Name/Time/Language] • Fixed a bug where NTP did not properly adjust the time on the TeraStation after a complete format was performed. [Quota] • Fixed a bug where quota warning emails were not sent after a complete format was performed. Version 1.00 [2013-07-01] • Initial release.