* TS-RHTGL/R5 Series Firmware Updater  Ver. 1.35 (posted on September 6, 2010)

- Customers using Ver.1.22
 - To update to Ver.1.35, you need to update to FW Ver.1.33 first. 
  After you update it to FW Ver.1.33, update to Ver. 1.35. 

   
  * TS-RHTGL/R5 Series Firmware Updater  Ver. 1.35
 
  Data  	TS-RHTGL/R5 Series Firmware Updater  
  Version      	Ver.1.35
  Name		TS-RHTGL_1.35_1.39.zip  
  Size		77,826,933 Bytes  
  Date		September 6, 2010 
  Platform	DOS/V, PC98-NX
  OS		Windows 2000/XP/Vista  
  Model		TS-RH1.0TGL/R5, TS-RH2.0TGL/R5, TS-RH3.0TGL/R5, TS-RH4.0TGL/R5  
  Copyright	BUFFALO Inc.  
  Distribution  Created by Self-extracted (Created from LHMelt. LHMelt is copyrighted by Micoo.)  
  Condition	No Reprinting allowed  
  Manual	Manual included in the product   
  GPL/LGPL License    
  This product uses GPL/LGPL applied software, and you have a right to obtain, modify, and redistribute these software's 
  source code.  Please see here for details. 
  Please see [here] for how to obtain the source code. 

[Software Description]
This software is the firmware update utility for TS-RHTGL/R5 series. 
It updates the firmware to Ver. 1.35. 
If your TS-RHTGL/R5 has had Ver. 1.35 or later installed, you do not have to update it. *If TS-RHTGL/R5 become EM (recovery mode), you need to recover by using the update. 

[How to check the firmware version]
Open NasNavigator's search screen, and select TS-RHTGL/R5. 
The number shown in "Firm" on the bottom left indicates the firmware version of that product. 
If the "name" field on the bottom left shows "TS-RHTGL-EM***", it is in EM mode. 

[Cautions]
- Failure to update the firmware and it ends up with the repair, you may be charged for the cost of the repair. 
- It may take a long time to complete the update. Please wait until the message is displayed. 

[How to use Updater]
1. Double-click(run) the file you have just downloaded.
2. Refer to the procedure to update in the HTML file which is automatically displayed after it is decompressed.  
* Make sure the cautions regarding to IP address described in "TS-RHTGL1.35 update.html" and run it by following the procedure. 

  *Described by illustration* ->how to update [FAQ]

[Revision History]
- Ver.1.34 -> Ver. 1.35 [8/30/2010]
[SYSTEM]
- Fix the problem that some of mails could not be sent from mail server when notifying by mail. 
- Fix the problem that mails sent by mail notification could not be properly viewed on some mailer. 
- Fix the problem that the special character "$" can be now used for a user's password. 
- Fix the problem that only one HDD could be recognized when connected two special HDDs simultaneously. 
- Fix the problem that files with extension property could not be written when accessing via SMB from MAC OSX. 

- Ver.1.33 -> Ver.1.34 [6/2/2010]
[SYSTEM]
- Fix the problem that the folder display information in the configuration screen was corrupted when hidden share setting for the shared folder. 

- Ver.1.30 -> Ver.1.33 [11/4/2008]
[SYSTEM]
- Fix the problem that new RAID array configuration failed when the spare drive with bigger capacity than standard was used. 
- Fix the problem that Error E06 and E07 was not properly displayed. 
- Fix the problem that the backup completion mail's mail contents was not properly output when backups for multiple folders were done. 
- Fix the problem that it could not be participated for the ActiveDirectory Domain of Windows Server 2008. 
- Fix the problem that Windows Vista SP1 did not properly work when it was participated to Active Directory domain and access restriction was used. 
- Fix the problem that it did not respond when joining the domain with large amount of users (from several thousand to ten thousands), and error E04 did not occur when shut down and rebooted when there was no response. 
- Fix the problem that error E04 was displayed when drive malfunction (Error E23) occurred. 
- Fix the problem that hidden shared setting of USB drive was not reflected. 

- Ver.1.27 -> Ver.1.30 [10/03/2008] 
[SYSTEM]
- NFS server is now supported. 
- Accessing via https is now supported. SSL communication can be done by accessing via "https://" 
- SSL/TLS is now supported on FTP server. SSL communication can be done when accessing via FTP. 
- New summer time of USA on Time Zone is now supported. 
- Fix the problem that the recycle bin of the shared folder setting and file operation setting did not properly work when TeraStation was rebooted. 
- Fix the problem that the shared folder could not be accessed if the TeraStation's workgroup name was over 20 byte (1 byte for half-byte and 3 byte for full-byte). 
- Fix the problem that the other users could not manipulate a file when that file was written by the registered user of the TeraStation from MacOS X.
- Fix the problem that mail was not sent if the following characters are included in the password for the mail notification. 
  "#$&()=\|<>
- Extend the swap area of HDD so that there is enough memory to backup for the large amount of files.  
- Modified that the number of HDD errors of the periodical report mail sent by the mail notification is not reset to 0 (zero) if TeraStation is rebooted 
- Fix the problem that the recycle bin was still backed up even though setting was not to backup the recycle bin, if the setting was not to create the recognizable folders other than normal backup on backup feature.   

Check [here] for the past history revision.