* WHR-300HP2 Firmware Version 2.51 * Name WHR-300HP2 firmware Version 2.51 File whr300hp2_us-251.zip Size 5,920,783 bytes Date Feb. 7, 2018 Platform Windows or Mac OS Windows 10, Windows 8.1/8, Windows 7, Windows Vista, Windows XP, macOS 10.5 - 10.12 Model WHR-300HP2 Copyright Buffalo Inc. Distribution ZIP archive Condition No reprinting allowed. Manual --------------------- [Software description] This firmware (version 2.51) is for the WHR-300HP2 only. Do not use it for other products. The software is compressed in a ZIP file. Extract the file and copy it to a folder or USB device. For more information, refer to the readme.txt file. --------------------- [Release Notes] Version 2.51 [Bug fix] Fixed the WPA/WPA2's security vulnerabilities. Version 2.50 [Bug fix] Fixed the issue where the permit configuration for "Internet-side Remote Access" didn't function correctly. Fixed the issue where the AirStation obtained an IP address automatically from the DHCP server even though an IP address was configured to be fixed if the AirStation was rebooted in bridge mode. Fixed the issue where the error message, "Invalid firmware." appeared and the AirStation rebooted when [Update Firmware] is clicked without choosing the firmware file on the "Update Firmware" page. Fixed the issue where the AirStation didn't refer to the secondary DNS server even though it received error packets from the DNS server. Fixed the issue where the AirStaion in wireless bridge mode could not access the master device even though the WPS button on the Setting was pushed. Fixed the issue where it took an excessively long time to load Settings. Fixed the issue where the connection destinations of PPPoE didn't display correctly on Settings. Fixed the issue where some multicast packets were not transferred when snooping was enabled. Fixed the issue where the AirStation could not access to the internet even though the PPPoE status is "Online" on the Settings. Fixed the issue where the PPPoE settings could not be configured properly. Version 2.20 [Bug fix] Fixed the issue where Settings sometimes did not display. Version 2.10 [Bug fix] Fix the issue where if using PPPoE, unnecessary data is added to DNS packets, preventing the AirStation from working properly with some set-top boxes. Version 2.00 [Bug fix] Fixed the issue where the Internet connection wizard did not work properly for iOS 9 mobile devices. Version 1.90 [Bug fix] Fixed the issue where if multiple ISPs were registered, changing the login password prevents Settings from being accessed remotely. Fixed the issue where the AirStation did not work properly when certain text were entered into some Settings pages. Version 1.80 [Bug fix] Fixed the issue where useless packets were sent to the wireless side when snooping functionality was enabled. Fixed the issue where useless multicast packets were translated to unicasts. Fixed the issue where IPv6 passthrough was not enabled even if it was enabled on the "Wireless Multicast Rate" page. Fixed the issue where on the "Routing" page, certain unusable destination addresses were usable, and certain usable destination addresses were unusable. Fixed the issue where settings could be restored even if the AirStation's firmware version was older than the firmware version used to create the config file. Fixed the issue where the error message for the encryption key was displayed on the "Easy Admin" page even if it is not needed. Fixed the incorrect text of the message displayed when eco mode was configured. Fixed the issue where the wireless bridge could not connect to the master router that did not broadcast SSIDs. Fixed the issue where in some situations, such as a power outage, settings were initialized or the AirStation and modem were shut down at the same time. Fixed the issue where if automatic update was enabled while the AirStation was not connected to the Internet, the firmware version is displayed as the latest. Fixed the issue where the forwarded ports sometimes could not be edited correctly. Fixed the issue where communication via LAN-side to another gateway sometimes could not be established properly. Fixed the issue where connected devices could not be displayed on the "Connected Clients List" page when 2.4 GHz wireless was disabled. Fixed the issue where the authentication screen was not displayed and the AirStation could not connect to the Internet when using some ISPs that require web authentication. Fixed the issue where an IP address could not be obtained when using some cable TV providers' Internet services. Fixed the issue where the AirStation kept its IP address after obtaining an IP address from the DHCP server even if the IP address was released when the AirStation was in access point mode. Fixed the issue where a ping test could not executed properly when the destination address was specified as a domain name. Fixed the issue where Settings could be accessed via the SSID whose SSID isolation was enabled. Fixed the issue where a config file saved while the AirStation was in router mode can restore settings when the AirStation is in access point mode. Fixed the issue where a config file saved while the AirStation was in access point mode can restore settings when the AirStation is in router mode. Fixed the issue where the DNS name resolution could not be done temporarily. Fixed the issue where the Internet-side multicast packets sometimes flowed into the LAN side. Fixed the issue where the AirStation could not connect to the Internet in access point mode when the AirStation connected to an SSID whose SSID isolation was enabled. Fixed the issue where the AirStation could not connect to the Internet in wireless bridge mode when the AirStation connected to the SSID whose SSID isolation was enabled. Version 1.70 [Bug fix] Fixed the issue where an error sometimes occurred even if the correct information was entered in routing settings. Fixed the issue where the domain name obtained from the Internet was not communicated to LAN-side devices using the DHCP server function. Fixed the issue where PPPoE could not be re-configured in Internet connection wizard after deleting PPPoE connections. Now you can correctly add the maximum number of forwarded ports. Fixed the issue where the snooping function did not work correctly. Fixed the issue where iOS devices sometimes could not wirelessly connect to the AirStation. Fixed some text in Settings. Version 1.60 [Bug fix] Fixed the issue where the AirStation sometimes replies to Address Resolution Protocol (ARP) requests from the Internet. Fixed the issue where a subnet mask cannot be configured correctly sometimes in routing settings. Fixed the issue where routing cannot be configured correctly sometimes. Fixed the issue where the Internet transmission rate sometimes drops. Fixed the issue where the PPPoE connection sometimes stops after the AirStation reboots. Fixed the issue with UPnP sometimes not working with some STBs. Fixed the issue where some router settings cannot be configured sometimes when the AirStation boots without an Internet connection. Modified to assign Automatic Private IP Addressing (APIPA) when the AirStation cannot obtain the IP address from the DHCP server while it is in the bridge mode. Fixed the contents of DDNS logs. Fixed the issue where the WAN-side IP address characters became corrupted in port forwarding settings when using a PPPoE connection. Deleted an unnecessary sentence in the Internet connection wizard. Version 1.50 [Bug fix] Fixed the problem where unstable communication occurs when PPPoE is configured using Internet Connection Wizard. Fixed the problem where PPPoE connections #2-#5 cannot be selected as the default PPPoE connection. Fixed the problem where if configuring MAC filtering from a mobile device, multiple MAC addresses cannot be registered at the same time. Fixed the problem where Internet Connection Wizard does not work correctly when a HTTPS-protected webpage opens. Fixed the problem where if the AC adapter is unplugged while booting AirStation, settings are sometimes initialized. Fixed the problem where some products are unable to obtain the IP address from DHCP server. Fixed some typos. Version 1.40 [Bug fix] Fixed the problem of bridge mode sometimes being incorrectly detected while in auto mode. PPPoE connections are now reestablished automatically after the AirStation reboots. Fixed the problem where the SSID was not broadcast after the AirStation was awakened from eco mode with the AOSS button. Corrected some typos in Settings. PPPoE connections are now disconnected automatically when the firmware is updated online. Fixed the problem of bandwidth being automatically configured to 20 MHz in 40 MHz networks. The AirStation now connects to the Internet correctly when SSID isolation is enabled. Version 1.20 [Added Features] Now compatible with multiple PPPoE sessions and IP unnumbered. [Bug fix] The System Info screen now displays the wireless bridge target access point MAC address properly. Version 1.00 First release.