HD-QLU3/R5,HD-QHU3/R5 Series Firmware Updater Version 1.10 HD-QLU3/R5,HD-QHU3/R5 Series Firmware Updater Version 1.10 Name: HD-QLU3/R5,HD-QHU3/R5 Series Firmware Updater Version: 1.10 Filename: hd-qxu3_rev110.zip Size: 445,661 Bytes Date: November 20, 2014 Compatible Device: Windows PC Compatible OSs: Windows XP (32-bit) Windows Vista (32-bit or 64-bit) Windows 7 (32-bit or 64-bit) Windows 8 (32-bit or 64-bit) Windows 8.1 (32-bit or 64-bit) Windows Server 2003 (32-bit) Windows Server 2003 R2 (32-bit) Windows Server 2008 (32-bit or 64-bit) Windows Server 2008 R2 (64-bit) Windows Server 2012 (64-bit) Windows Server 2012 R2 (64-bit) Models: HD-QLU3/R5, HD-QHU3/R5 series Copyright: Buffalo Inc. Distribution: ZIP archive Condition: No reprinting allowed. [Introduction] This software is the firmware update utility for the HD-QLU3/R5 and HD-QHU3/R5 series. If the current firmware version is "1.00" displayed on the RAID utility, the firmware must be updated. To confirm the current firmware version: 1. Open RAID utility. 2. Click [File] - [Information]. 3. Check the current version. [How to Update] 1. Connect HD-QLU3/R5 or HD-QHU3/R5 to your PC. 2. Double-click the downloaded zip file to extract and run "QxU3_UP.exe". If the firmware is the latestversion, "The connected USB drive already has the latest firmware" message will appear. If you see such a message, close the updater and continue using the product without updating. 3. Click [Update]. 4. When the "To finish the firmware update" window appears, follow the messages and reboot the drive, then click [OK]. If the drive is not rebooted correctly, the firmware update will not properly finish. Do not disconnect the USB cable or AC adapter while updating, otherwise the drive may become unusable. [Notes] - Back up the data on your HD-QLU3/R5 or HD-QHU3/R5 series drive before updating. - If you have multiple HD-QLU3/R5 or HD-QHU3/R5 series drives, connect it to your PC and update its firmware one by one. - Before the update starts, disconnect any other USB devices (except mouse and keyboard) and connect only one drive at a time. [Release Notes] Version 1.10 Initial release Firmware version: V04L01R02-11:3 (displayed on the updater)/1.01(displayed on RAID utility) Bug Fixes: - Fixed the issue where the device sometimes could not write data during high volume data transfers. - Fixed the issue where the internal temperature monitor did not work correctly when the PC reboots or recovers from hibernation mode.